LogoLutz

Drum pump MP-PP for mixing and pumping

Lutz Drum and Container Pumps
Drum pump MP-PP for mixing and pumping
Pump tube MP-PP-SL
with motor MA II 5

Liquid examples:
Emulsions, suspensions, dispersions, paints and lacquers

 

Features:

  • Suitable for mixing and pumping of corrosive and neutral, thin-bodied up to slightly viscous liquids in non-explosive areas
  • Two functions („pumping“ and „mixing and pumping“) in one unit
  • Optional with electric or air driven motors
  • No grease fillings
  • Modular, service friendly design

 

MP open MP closed

 

Sealing system:
Mechanical seal (MS) or sealless construction (SL)

Type of impeller:
Radial-flow impeller (L) for high delivery head or
Axial-flow rotor (R) for high flow rates.

Immersion length:
1000 and 1200 mm available from stock
(Special lengths 400-2500 mm on request)

Benefit:

  • Operation mode „pump only“ or „mix and pump“ can  be changed without removal by means of a hand lever
  • High pump and mix capacity to ensure best homogenization and emptying within a short time
  • Suitable for 200-l drum with bung hole or IBC-container with dome cap as well
  • Lube-free pump tube, thus no contamination of the liquid

Motor MA II 3 / MA II 5 / MA II 7

ma

Solid and powerful universal motor with double wall housing suitable for pumping aqueous to light viscous, aggressive and outgassing acids and caustics.

  • Robust and powerful
  • Double wall housing protects inner parts from corrosion
  • Externally ventilated
  • 230V/50Hz, 110-120V/50-60Hz, 42V, 24V, optionally with 460, 575 and 795 W, protection class IP 54


Motor MI 4 / MI 4-E

mi

Small and lightweight universal motor suitable for pumping thin-bodied to slightly viscous acids, alkalis and solutions.

  • Light and convenient
  • Optionally with infinitely variable speed controller for a controlled flow rate
  • Internally ventilated
  • 230V/50Hz, 110-120V/50-60Hz, 500W, protection class IP 24

Motor MD-1 / MD-2

MD

Compact compressed air motor for handling neutral and aggressive liquids.

  • Overload-proof
  • Optionally with (MD-2) / without (MD-1) manual operation
  • Delivery flow is easy to control
  • 400 W at 6 bar operating pressure,
    operating range from 3 – 6 bar

Materials MP-PP-SL MP-PP-MS
Housing: Polypropylene/PVDF Polypropylene/PVDF
Seals: - Viton®
Mechanical seal: - Carbon, SiC, Viton®, HC-4
Bearing:   ETFE/PTFE  ETFE/PTFE 
Drive shaft: Stainless steel (1.4571)  Stainless steel (1.4571)  
Impeller: PP  PP 
Type of impeller:   Radial-flow (L)
or Axial-flow (R)		 Radial-flow (L)
or Axial-flow (R)
Nominal diameter: 50 mm 50 mm
Temperature of medium:  up to 50 °C  up to 50 °C 
Hose connection:   G 1 1/4 male  G 1 1/4 male 
Length:  1000 / 1200 mm  1000 / 1200 mm 
     
Operating data Radial-flow (L) Axial-flow (R)
Delivery rate:* up to 95 l/min  up to 180 l/min
Delivery head:* up to 25 m wc  up to 12 m wc 
Viscosity:** up to 850 mPas  up to 600 mPas 

* determined with water at 20°C
** determined with oil

Fig. 1: Pump tube MP-PP with motor MA II 5

 

MP open

MP closed

Hand lever in position "mixing" -

Mixing apertures open -
the liquid is mixed and pumped

Hand lever in position "pumping" -

Mixing apertures closed -
the liquid is pumped only

Fig. 2: Principle mixing and pumping MP

 

MP container
Fig. 3: Mixing pump tube MP-PP in use with IBC container

SeparatorLine

More Information:

Link:
http://www.lutz-pumpen.de/en/desktopdefault.aspx/tabid-138/78_read-33/