REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Ex-protection
Compressed air
Drum pump
Drum pump - solvent
Drum pump - solvent
Drum pump - solvent
Drum pump - solvent

Drum pump - solvent

for highly flammable hydrocarbons

Immersion depth:

Motor:

Preis anfragen

Fields with * are required
  • 0205-475
  • upon request
  • is suitable for the Ex - area
Description: Drum pump is suitable for low viscosity, flammable and combustible...more
Product information "Drum pump - solvent"

Motor: MD2xL - 1000W, 6 bar, comfort handle (for higher flow rate, viscosity and density)
Immersion depth : 1000 mm (sealless)


Description:

Drum pump is suitable for low viscosity, flammable and combustible hydrocarbons. Perfectly suitable for the withdrawal or decanting of solvents.

  • optionally available with Ex - plug
  • Pumping unit equipped with Lutz original hand wheel
  • suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

  • optionally with electric or compressed air drive
  • no lubricants and therefore no contamination of the pumped medium by lubricants
  • highly resistant noble carbon shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump replaceable
  • approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
▼ MEDIUM ▼
Suitable media: Styrol, Isopropanol, Benzin, Ethanol, Essigsäure, Ameisensäure, Kerosin, Methanol, Petroleum, Butanol, Aceton, Butylacetat, Toluol, Nikotin, Äththylacetat
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 124
Delivery head (up to m wc): 35
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 2.8
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 1000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Type of drive: Compressed air
Output (W): 1000
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54
Version: Komfortgriff

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
Electrical
Drum pump
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/