Ex-protection

Electrical

Drum pump

Preview: Drum pump for complete drum drainage - solvents

Drum pump for complete drum drainage - solvents

for highly flammable hydrocarbons

Order number: 0205-505
on request
is suitable for the Ex-area

Description: The drum pump is suitable for thin-bodied, flammable and inflammable liquids...more

Close menu

Product information "Drum pump for complete drum drainage - solvents"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)

Description:

The drum pump is suitable for thin-bodied, flammable and inflammable liquids and hydrocarbons. Perfectly suited for removing or transferring explosive liquids and solvents.

Optionally available with Ex - plug
Pump tube is equipped with Lutz original hand wheel
Suitable for drum emptying of alternative fuels, oils, flammable liquids

Features & Benefits

Optionally with electric or compressed air drive
no lubricants and therefore no contamination of the pumped fluid by lubricants
Optimized drum emptying with a residual quantity of approx. 0,1 litres
No leakage if the pump tube is inclined or moved
Maximum product utilisation at reduced drum cleaning and waste disposal costs
Approved according to ATEX Directive 2014/34/EU, Category 1/2

Technical data

Suitable media:

Styrol, Kerosin, Ameisensäure, Essigsäure, Ethanol, Benzin, Butanol, Isopropanol, Methanol, Petroleum, Aceton, Äththylacetat, Butylacetat, Nikotin, Toluol

Pump tube (material):

Niro (Edelstahl)

Impeller (material):

ETFE (ethylene-tetrafluorethylene copolymer)

Static seal (material):

FEP ummantelt

Mechanical seal (material):

Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)

Bearing (material):

Edelkohle

Drive shaft (material):

Edelstahl (1.4571)

Flow rate (up to l/min.):

Delivery head (up to m wc):

Temperature of medium (up to °C):

100

Density (up to kg/dm³):

1.6

Operating pressure (max. bar):

lower than 6 bar

Viscosity (up to mPas):

500

Type of impeller:

Radial-flow impeller

Seal type:

Mechanical seal (MS)

Immersion length (mm):

from 1000 mm

Immersion tube diameter (up to mm):

Connecting threads:

1 1/4"

Explosion protection:

Yes

Type of drive:

Electric

Output (W):

460

Voltage (V):

230

Frequency (Hz):

Protection type:

IP54

Version:

mit Unterspannungsauslöser

* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt.

** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler

Here yoll find all files for this article. more

Close menu

Tag	Titel	Description	File name	Action
08 Motors	Electric motors - Serie ME II	Operating Manuals	0698-020_Motor_ME_II_de_en.pdf
01 Drum pumps	Pump tubes - All models	Operating Manuals	0698-030_Pump_tubes_de_en.pdf

Explosion protection

Electric

Barrel pump

Drum pump - solvent

for highly flammable hydrocarbons