REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Ex-protection
Electrical
Complete set
Pump Set - Explosive media
Pump Set - Explosive media
Pump Set - Explosive media
Pump Set - Explosive media
Pump Set - Explosive media
Pump Set - Explosive media

Pump Set - Explosive media

for aggressive and highly inflammable liquids

Immersion depth:

Motor:

Preis anfragen

Fields with * are required
  • 0205-411
  • upon request
  • is suitable for the Ex - area
Description: The Pump Set is suitable for thin, flammable and highly inflammable liquids....more
Product information "Pump Set - Explosive media"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)


Description:

The Pump Set is suitable for thin, flammable and highly inflammable liquids. Perfectly suited for withdrawing or transferring explosive media.

  • Optionally available with Ex - plug
  • Pump tube equipped with Lutz original handwheel
  • Suitable for filling or transferring alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Highly resistant noble carbon shaft bearing
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump are interchangeable
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
▼ MEDIUM ▼
Suitable media: Styrol, Toluol, Nikotin, Butylacetat, Äththylacetat, Aceton, Essigsäure, Ameisensäure
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 95
Flow rate with nozzle (up to l/min): 50
Delivery head (up to m wc): 14
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.6
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 350
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
▼ SCHLAUCH | HOSE | SLANG ▼
Schlauchlänge (mm): 2000
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Type of drive: Electric
Output (W): 460
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54
Version: mit Unterspannungsauslöser

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Set
1000 mm
Explosion protection
Pump Set - Solvent Pump Set - Solvent
for highly flammable hydrocarbons
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/