REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Food
Plastic
PE
Double diaphragm pump DMP model 1 1/2" PEE PURE

Double diaphragm pump DMP model 1 1/2" PEE PURE

for the food and pharmaceutical sector

Preis anfragen

Fields with * are required
  • 5248-030
  • A 443 | B 605 | C 230
Description: The double diaphragm pump is suitable for food and pharmaceutical...more
Product information "Double diaphragm pump DMP model 1 1/2" PEE PURE"

Material: Polyethylene (PE)
Diaphragm / valve balls / seals material: PTFE / PTFE / EPDM
Center block material:  Polypropylene glass fiber reinforced (PP)

Material explanation: EPDM = ethylene propylene diene rubber, FPM = Fluorine rubber, 
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene, 
TPC-ET + TFM (PTFE) = Thermoplastic polyester elastomer + Modified polytetrafluoroethylene, 
TPV (EPDM-PP) = EPDM/PP compound


Description:

The double diaphragm pump is suitable for food and pharmaceutical applications, as well as large flow rates and higher viscosities.

  • typical applications: liquid food and luxury food, pharmaceutical agents and cosmetic products
  • highly resistant PE material with low coefficient of friction
  • FDA compliant

Features & Advantages

  • high hydraulic performance
  • maintenance optimized design and easy installation
  • self-priming (even in dry condition)
  • ice-free air system
  • blockage-free operation
  • food safe connections
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Double diaphragm pumps (material): non - metallic
Housing Material: PE (Polyethylen)
Centre block (material): Polypropylene glass fibre reinforced (PP)
Diaphragm (material): PTFE (polyvinylidene fluoride)
Valve ball (material): PTFE (Polytetrafluorethylen)
Seals (material): EPDM (ethylene-propylene-diene monomer)
Valve seat (material): PE (Polyethylen)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 370
Delivery head (up to m wc): 80
Solids handling (max. ø mm): 7
Temperature of medium (up to °C): 60
Viscosity (up to mPas): 30000
Suction head dry (up to max. mwc*): 4,5
Air pressure (max. bar): 8
Air pressure start-up (min. bar): 2
Sound pressure level dB(A): 80
Displacement per chamber (in cm³): 670
Displacement per chamber (in cm³): 1340
▼ PUMPE | PUMP | POMP ▼
Size: 1 1/2"
Air inlet (inch) inside: 1/2"
Druckstutzen (DN): 40
Saugstutzen (DN) : 40
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Connection: Flansch
Certification: FDA-compliant
Type: DMP 1 1/2" PEE Pure PE/EPDM

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/