REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Plastic
PVDF
Compressed air
Double diaphragm pump DMP model 1" plastic
Double diaphragm pump DMP model 1" plastic
   

Double diaphragm pump DMP model 1" plastic

for industrial applications as well as for barrel, IBC and tank emptying

Material:

Werkstoffe: Membranen / Ventilkugeln / Dichtungen:

Preis anfragen

Fields with * are required
  • 5231-050
  • A 310 | B 345 | C 203
  • is not suitable for hazardous areas
Description: The double diaphragm pump is suitable for industrial applications and for...more
Product information "Double diaphragm pump DMP model 1" plastic"

Material: polyvinylidene fluoride carbon fiber reinforced (PVDF)
diaphragm / valve balls / seals material: FPM / FPM / FPM
Center block material: Polypropylene carbon fiber reinforced (PP)

Material declaration: EPDM = ethylene propylene diene rubber, FPM = Fluorine rubber, 
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene, 
TPC-ET + TFM (PTFE) = Thermoplastic polyester elastomer + Modified polytetrafluoroethylene, 
TPV (EPDM-PP) = EPDM/PP compound


Description:

The double diaphragm pump is suitable for industrial applications and for drum, IBC and tank emptying.

  • typical applications: transfer from drums and tanks, transfer of corrosive solutions and chemicals
  • integrated silencer up to model size DMP 1"
  • highly resistant TFM (PTFE) diaphragms (modified PTFE)

Features & Benefits

  • high hydraulic performance
  • maintenance optimized design and easy installation
  • self-priming (even in dry condition)
  • reinforced elastomers and thermoplastic diaphragm
  • absolutely oil-free
  • blockage-free operation
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Double diaphragm pumps (material): non - metallic
Housing Material: Polyvinylidene fluoride carbon fibre reinforced (PVDF)
Centre block (material): Polypropylene carbon fibre reinforced (PP)
Diaphragm (material): FPM (fluorinated rubber)
Valve ball (material): FPM (fluorinated rubber)
Seals (material): FPM (fluorinated rubber)
Valve seat (material): PVDF (polyvinylidene fluoride)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 175
Delivery head (up to m wc): 80
Solids handling (max. ø mm): 6,0
Temperature of medium (up to °C): 90
Viscosity (up to mPas): 10000
Suction head dry (up to max. mwc*): 4,5
Air pressure (max. bar): 8
Air pressure start-up (min. bar): 2
Sound pressure level dB(A): 80
Displacement per chamber (in cm³): 220
Displacement per chamber (in cm³): 440
▼ PUMPE | PUMP | POMP ▼
Size: 1"
Air inlet (inch) inside: 3/8"
Pressure joint (inch) inside: 1"
Suction joint (inch) inside: 1"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: No
Connection: Gewinde
Type: DMP 1" KNV PVDF/FPM

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Explosion protection
Metal
Aluminium
Double diaphragm pump DMP model 1" metal Double diaphragm pump DMP model 1" metal
for drum, IBC and tank emptying
Food
Metal
Stainless steel
Double diaphragm pump DMP model 1" PURE Double diaphragm pump DMP model 1" PURE
for the food and pharmaceutical sector
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/