Version: without explosion protection
Note: Dhe nominal diameter of the flow meter is DN 25.
Description:
The first flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and a magnet integrated in the measuring chamber, it enables accurate measurement of the volume flow rate, while measuring non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents precisely, quickly and, above all, efficiently.
- Optionally in explosion-proof design
- Examples of media: paints, varnishes, mineral oils, acids, alkalis, mineral oils, solvents
Features & Advantages
- Measurement according to the oval wheel principle
- High measuring accuracy due to overtravel correction
- Low pressure losses in the system
- Touch screen display with self-explanatory, multilingual user interface
- Relay module for quantity preselection can be retrofitted at any time
- Approved according to ATEX directive 2014/34/EU, category 2
Housing Material: | PPS (Polyphenylensulfid) |
Measuring wheels (material): | PPS (Polyphenylensulfid) |
Axis (material): | Hastelloy C (2.4610) |
Seals (material): | FPM (fluorinated rubber) |
Temperature of medium (up to °C): | 80 |
Flow rates (up to l/min): | 75 |
Operating pressure (max. bar): | from 8 bar |
Messgenauigkeit kalibriert**: | ± 2,0 |
Wiederholgenauigkeit (%): | ± 0,03 |
Viscosity (up to mPas): | 1000 |
Hose connection - nominal diameter (DN): | 25 |
Operating pressure (max. bar): | from 8 bar |
Protection type: | IP55 |
Version: | oval gear principle, Threaded connection |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler