REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Ex-protection
Mechanical seal (GLRD)
Stator PTFE
Eccentric screw pump tube B70V HD-D Industry

Eccentric screw pump tube B70V HD-D Industry

with circulation/flushing connection for three-phase motors

Fördermenge:

Preis anfragen

Fields with * are required
  • 0173-016
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The B70V HD-D Eccentric screw pump in the industrial version is suitable for...more
Product information "Eccentric screw pump tube B70V HD-D Industry"

Flow rate: 12 l/min .
Drive shaft: Cardan shaft (GW)
Seal type: Mechanical seal (GLRD)
Note: With Ex approval


Description:

The B70V HD-D Eccentric screw pump in the industrial version is suitable for pumping water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

  • Version with circulation/flushing connection with internal thread 3/8".
  • Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product delivery
  • Low wear
  • Ideal for mobile use
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Edelstahl (1.4571/1.4404)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Kohle, CrMO-Guss, FPM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 12
Delivery head (up to bar)*: 6
Temperature of medium (up to °C): 100
Viscosity (up to mPas): 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Gelenkwelle (hochviskose Medien)
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 54
Statorgröße: 12.1
Connections: 3/8"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Type of drive: Three phase
Version: Zirkulations-/ Spülanschluss
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Type: B70V HD-D

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
Mechanical seal (GLRD)
Stator PTFE
Eccentric screw pump tube B70V HD-SR Industry Eccentric screw pump tube B70V HD-SR Industry
with circulation/flushing connection for...
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/