Flow rate: 12 l/min .
Seals: FPM (fluorocarbon rubber)
Note: The connection to the discharge nozzle of the pumping station is made with a Tri-Clamp connection.
The B70V SanitaryPlus foodstuff pump is a powerful positive displacement pump for difficult to handle, viscous and tough media up to the limits of flowability. It is driven by directly coupled three-phase motors with and without frequency converter.
Properties:
- For liquid foods and luxury foods, active pharmaceutical ingredients and cosmetic products
- Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10
- Selected materials according to FDA and 3-A standard
- Welded joints according to the hygiene requirements of the EHEDG
- Tri-Clamp connection according to DIN 32676
- With three-phase current drive
- Quick coupling between motor and pumping station
Advantages:
- Gentle, low-pulsation product conveyance
- Thread-free, manually releasable quick connections in the area in contact with the medium
- Quick and easy to dismantle
- Easily accessible and inspectable components
- Easy cleaning
- Drive can be released by motor quick release
Housing Material: | Stainless Steel |
Mechanical seal (material): | SIC, Kohle, EPDM |
Static seal (material): | FPM (fluororubber), EPDM |
Drive shaft (material): | Edelstahl (1.4571) |
Stator (Werkstoff): | EPDM (Ethylen-Propylen-Dien-Kautschuk) |
Rotor (Werkstoff): | Edelstahl (1.4571) |
Flow rate (up to l/min.): | 12, 25 , 50 |
Delivery head (up to m wc): | 6, 8 |
Temperature of medium (up to °C): | 100 |
Immersion length (mm): | 1100 |
Immersion tube diameter (up to mm): | 54 |
Seal type: | Mechanical seal (MS) |
Druckstutzen (DN): | 50 |
Statorgröße: | 12.1, 25.1, 50.1 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler