REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Ex-protection
Elektromotor, Universalmotor für LUTZ Fasspumpe, ex-geschützt, 930 W

Motor ME II 8

Version:

Preis anfragen

Fields with * are required
  • 0050-042
  • upon request
  • The Atex guidelines can only be complied with if a Pump tube with an explosion-proof Motor is used for highly flammable liquids.
Description The Motor ME II 8 is suitable for low-viscosity, highly flammable, combustible...more
Product information "Motor ME II 8"

with undervoltage release


Description

The Motor ME II 8 is suitable for low-viscosity, highly flammable, combustible and outgassing liquids. Depending on the application, various Motors with corresponding voltage are available, which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

  • Optionally with undervoltage release
  • Externally ventilated Motor
  • Explosion-proof Motor according to ATEX - directives and IEC Ex

Features & Advantages

  • Double insulation with protective earth connection
  • Optimized cooling air flow
  • Double-walled housing protects against corrosion of internal parts
  • Protection against vapours
  • Long service life
Technical data
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Type of drive: Electric
Output (W): 930
Voltage (V): 230
Frequency (Hz): 50
Version: ohne Unterspannungsauslöser
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Type: ME II 8-230

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/