Drum pump connection
made of PP for the Flow Meter HDO 250P
- Order number: 0211-332
- op verzoek
Material: PP
Connection: 1" AG to 1 1/4" IG
Seals: PTFE
Description:
The drum pump connector is required to connect the Flow Meter HDO 250P/HDO 250 to a B70V or HD-E progressive cavity pump. For the connection to the Flow Meter HDO 250 Ex version to a Eccentric screw pump the connection with the conductive barrel pump connection in the stainless steel version is necessary.
- Materials: PP / stainless steel
Features & Advantages
- Connection: 1" AG to 1 1/4" IG / 1" AG to 1 1/2" IG
- Seals made of PTFE
| Produktgruppe: | Exzenterschneckenpumpen, Durchflussmesser |
| Accessories group: | Connections |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter