Pump Set - B2 Vario PP
for thin-bodied acids
- Order number: 0205-020
- upon request
- not suitable for flammable liquids
Immersion depth: 500 mm (sealless)
Description:
The B2 Vario Pump Set is suitable for thin-bodied, aqueous to slightly viscous media. The set is suitable for removing small containers such as Canister, hobbocks and drums. The pump is flexible at all times, thus saving important resources.
- Infinitely variable speed controller for the transfer and filling of small quantities
Features & Advantages
- Sealless design (DL) conditionally safe to run dry
- infinitely variable
- powerful Motor with improved service life
- service-friendly and easy to dismantle
| Suitable media: | Akkusäure, Ammoniakwasser, Fotoentwickler, Fotofixierer, Glykol, Phosphorsäure, Salzsäure, Wasserstoffperoxid |
| Pump tube (material): | PP (polypropylene) |
| Impeller (material): | PP (polypropylene) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE / PTFE |
| Drive shaft (material): | Hastelloy C (2.4610) |
| Flow rate (up to l/min.): | 75 |
| Flow rate with nozzle (up to l/min): | 22 |
| Delivery head (up to m wc): | 7 |
| Temperature of medium (up to °C): | 50 |
| Density (up to kg/dm³): | 1.3 |
| Viscosity (up to mPas): | 300 |
| Type of impeller: | Axial-flow rotor |
| Seal type: | Sealless (SL) |
| Immersion length (mm): | up to 500 mm |
| Immersion tube diameter (up to mm): | 32 |
| Connecting threads: | 1" |
| Schlauchlänge (mm): | 1500 |
| Type of drive: | Electric |
| Output (W): | 200 |
| Voltage (V): | 230 |
| Frequency (Hz): | 50 |
| Protection type: | IP24 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
