REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Ex-protection
Rotor
Pump tube Niro for mixing and pumping

Pump tube Niro for mixing and pumping

for flammable liquids

Immersion depth:

Preis anfragen

Fields with * are required
  • 0151-240
  • upon request
  • For highly flammable liquids, a Pump tube with an explosion-proof Motor must be used, because otherwise the ATEX directives cannot be complied with.
Description: The Lutz Pump tube (Niro) is suitable for corrosive, aqueous to slightly...more
Product information "Pump tube Niro for mixing and pumping"

Immersion depth: 1000 mm
Type of seal : Mechanical seal  (GLRD)


Description:

The Lutz Pump tube (Niro) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original handwheel
  • Suitable for mixing and pumping alternative fuels, oils, flammable liquids

Features & Advantages

  • Also available with Tri-Clamp connection 
  • Optionally with electric or compressed air drive
  • Two functions (pumping and mixing) in one unit
  • No leakage when the pumping unit is tilted or repositioned
  • High mixing and conveying capacity for thorough homogenization
  • Switching between the pumping and mixing functions takes place without disturbing the ongoing operation, which is made possible by a small lever on the handwheel
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 216
Delivery head (up to m wc): 14,5
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.4
Viscosity (up to mPas): 650
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Axial-flow rotor
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Type: MP Niro 50/41-R GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Stainless steel shaft
Impeller
HC Wave
Impeller
Stainless steel shaft
Rotor
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/