REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Food
Ex-protection
Impeller
Pump tube Stainless steel for complete emptying - PURE

Pump tube Stainless steel for complete emptying - PURE

for food (PURE series)

Immersion depth:

Dichtungen:

Preis anfragen

Fields with * are required
  • 0151-156 + 0151-360
  • upon request
  • The designation PURE includes the approvals ATEX, FDA and the regulation (EG) 1935/2004
Description: The Lutz Pump tube for complete emptying (stainless steel) PURE is suitable...more
Product information "Pump tube Stainless steel for complete emptying - PURE"

Immersion depth: 700 mm
Type of seal: mechanical seal FPM (GLRD FPM)
Note: for the Atex - approval a pump tube with an explosion-proof motormust be used, otherwise the ATEX - guidelines cannot be observed.


Description:

The Lutz Pump tube for complete emptying (stainless steel) PURE is suitable for aqueous and fatty food. Depending on the application different Motors are available which can be combined with the Pump tube at any time. Thus you are always flexible and save important resources.The pump tubes can be disassembled and cleaned. They have no grease filling, which means that no products contamination occurs.

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original hand wheel
  • to Drum emptying for foodstuffs, cosmetics and pharmaceutical products containing alcohol and flammable cleaning agents

Features & Advantages

  • optionally with electric or compressed air drive
  • physiologically harmless version (PURE)
  • hygienic / aseptic connections
  • optimised drum residue emptying with a remaining quantity of approx. 0.1 litres
  • maximum product utilization with reduced drum cleaning and disposal costs 
  • suitable for food contact according to EC 1935/2004 and FDA
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): PTFE (Polytetrafluorethen), FPM (fluororubber)
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 78
Delivery head (up to m wc): 22
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.9
Viscosity (up to mPas): 950
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Gleitringdichtung FPM (GLRD)
Immersion length (mm): from 500 mm
Immersion tube diameter (up to mm): 41
Anschluss Tri-Clamp (DN): 32
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Connection: Tri-Clamp
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004
Type: RE Niro 41-L-GLRD

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/