REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Stainless steel shaft
Impeller
Pump tube Alu

Pump tube Alu

for mineral oils

Immersion depth:

Dichtungen:

Preis anfragen

Fields with * are required
  • 0132-305
  • upon request
  • the Pump tube is not permissible for the ATEX - range
Description: The Lutz Pump tube (Alu) is suitable for corrosive, aqueous to slightly...more
Product information "Pump tube Alu"

Immersion depth: 1000 mm
Type of seal: sealless (DL)


Description:

The Lutz Pump tube (Alu) is suitable for corrosive, aqueous to slightly viscous media. Depending on the application, various Motors are available, which you can combine with the Pump tube at any time. This means you are flexible at all times and thus save important resources. 

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for filling or transferring alternative fuels

Features & advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimized Drum emptying
  • Universally resistant ETFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the mechanical seal (GLRD) or seal-less (DL) pump can be replaced
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Alu (Aluminium)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE
Drive shaft (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 95
Delivery head (up to m wc): 25
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.9
Viscosity (up to mPas): 800
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Type: Alu 41-L-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Stainless steel shaft
Rotor
Pump tube Alu Pump tube Alu
for mineral oils
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/