REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Food
Gasket FPM
Eccentric screw pump tube B70V in PURE version

Eccentric screw pump tube B70V in PURE version

for highly viscous and pasty foodstuffs

Version:

Preis anfragen

Fields with * are required
  • 0175-204 + 0175-208
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D 120.1 in PURE design is a powerful positive...more
Product information "Eccentric screw pump tube B70V in PURE version"

Design: PURE with FPM seal (fluorocarbon rubber)
Drive shaft: Cardan shaft (GW)
Note: 
 The connection to the discharge connection of the pumping station is made with a Tri-Clamp connection


Description:

The Eccentric screw pump B70V-D 120.1 in PURE design is a powerful positive displacement pump for highly viscous and viscous media up to the limits of flowability. Depending on the application, various gear motors are available which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • also available in special immersion depths
  • Media examples: viscous cosmetic products, food and etc.

Features & Advantages

  • construction free of dead space
  • Uniform volume flow
  • easy to dismantle, easy to clean
  • Gentle, low-pulsation product conveying
  • Smooth running and low wear
  • Large selection of robust and powerful drive motors
  • Drive motor optionally with integrated frequency converter.
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Edelstahl (1.4571)
Static seal (material): FPM (fluororubber)
Mechanical seal (material): WC, WC, FPM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 120
Delivery head (up to bar)*: 6
Temperature of medium (up to °C): 140
Viscosity (up to mPas): 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Gelenkwelle (hochviskose Medien)
Seal type: Mechanical seal (MS)
Immersion length (mm): 1100
Statorgröße: 120.1
▼ PUMPE | PUMP | POMP ▼
Druckstutzen (DN): 50
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Connection: Tri-Clamp
Certification: FDA-compliant, Verordnung (EG) 1935/2004
Type: B70V Pure

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/