REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Ex-protection
Impeller
Pump tube HC

Pump tube HC

for flammable chemicals

Immersion depth:

Preis anfragen

Fields with * are required
  • 0162-204
  • upon request
  • The Atex guidelines can only be observed if a Pump tube with an explosion-proof Motor is used for highly flammable liquids.
Description: The Lutz Pump tube (HC) is suitable for thin-bodied, inflammable and highly...more
Product information "Pump tube HC"

Immersion depth: 1000 mm
Type of seal: sealless (DL)


Description:

The Lutz Pump tube (HC) is suitable for thin-bodied, inflammable and highly corrosive chemicals. Depending on the application different Motors are available which can be combined with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • also available in special immersion depths from 200 - 2500 mm
  • Pump tube equipped with Lutz original hand wheel
  • used in areas of fire and disaster control

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Approved according to ATEX directive 2014/34/EU, category 1/2
  • Highly resistant carbon and ETFE - Shaft bearing
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump are interchangeable
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): HC (Hastelloy C)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FPM (fluororubber)
Bearing (material): ETFE / Kohle
Drive shaft (material): Hastelloy C (2.4610)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 123
Delivery head (up to m wc): 26
Temperature of medium (up to °C): 120
Density (up to kg/dm³): 1.9
Viscosity (up to mPas): 750
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 42
Connecting threads: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: Yes
Certification: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Type: HC 42-L-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Ex-protection
Rotor
Pump tube HC Pump tube HC
for flammable chemicals
Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/