REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
PP
DN 50 x 2" IG
Hose connection

Hose connection

for DMP 2" and B70-V

Material:

Preis anfragen

Fields with * are required
  • 5000-250
  • op verzoek
Description: The hose connector connects the delivery hoses to the discharge/suction port...more
Product information "Hose connection"

Material: PP
Connection: DN 50 x 2" IG
Note: Can only be used in conjunction with a threaded flange


Description:

The hose connector connects the delivery hoses to the discharge/suction port of the Double diaphragm pumps or the Nozzle. When using a Double diaphragm pump, either a suitable reducing nipple or a threaded flange must be used in addition to the hose connection.

  • special connections are available on request

Features & Advantages

  • Materials PP / PVDF / stainless steel
  • Connections: DN 38 x 1 1/2" IT / DN 50 x 2" IT
Technical data
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Produktgruppe: Exzenterschneckenpumpen, Membranpumpen
Accessories group: Hose connection / Hose clips

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/