No results were found for the filter!
Explosion protection
DN 19 (3/4")
2 m
Hose set solvent (NBR)
for highly flammable hydrocarbons
Description: The hose set is suitable for a wide range of commercially available solvents. The hose is electrically conductive, so it can also be used in explosive environments. The set is used for connection to the pumping station or the nozzle. also available in special lengths on request electrically conductive Features & Advantages Hose connection: 1 1/4" IT Nominal...
Explosion protection
DN 19 (3/4")
2 m
Hose set explosive media
for aggressive and highly flammable liquids
Description: The hose set is suitable for pure chemicals and explosive liquids. The hose is electrically conductive, so it can also be used in explosive environments. The set is used for connection to the pumping station or the nozzle. also available in special lengths on request electrically conductive Features & Advantages Hose connection: 1 1/4" IT Nominal width: DN 19...
Bracket
for Container pump B200
Description: The bracket relieves pressure on the discharge spout when heavy engines are used and the turnbuckle cannot be used.
Tri-Clamp Connections
suitable for Eccentric screw pump B70V - 120.1
Description: The Tri-Clamp reducer is suitable for connection to Eccentric screw pump tube B70V - 120.1. Features & Advantages Connection: DN 50 to G 1 1/2" AG Consisting of adapter fitting Tri-Clamp incl. EPDM seal and Tri-Clamp closing clip
Pulse generator ring
for contactless indirect quantity measurement
Description: The pulse generator ring must be ordered additionally to match the shaft diameter of the motor. for Eccentric screw pumps Features & Advantages for shaft diameter: Ø 19 / Ø 20 / Ø 24 / Ø 25 / Ø 28 / Ø 30
Support bracket
with integrated pulse sensor
Description: The carrying bracket with integrated pulse sensor is the perfect upgrade for your B70V-D progressive cavity pump. Magnetic pulses from the rotating motor shaft are transmitted to the pulse sensor without contact via a pulse transmitter ring. The recorded pulses are evaluated in the Lutz BE10 operating unit and output on the display as the delivered flow rate on...
PP
Installation flange
for submersible centrifugal pump B50
Description: The mounting flange is used to attach the tank pump to a mating flange. special flanges are available on request Properties & Advantages Material: PP Nominal width: DN 100
PP
Outlet flange
for submersible centrifugal pump B50
Description: The discharge flange is used to connect individual components to the B50 submersible centrifugal pump. The flange includes the necessary gaskets. special connections are available on request Properties & Advantages Material: PP Nominal diameter: DN 40 Diameter: 150 mm.
Foot strainer
for submersible centrifugal pump B6
Description: The foot strainer will be used for the B6 submersible centrifugal pump. By plugging the strainer onto the pump foot, coarse impurities can be kept away from important components such as the drive (impeller). to be plugged onto the pump foot Features & Advantages Materials: PP / Niro Hole diameter: 5 mm / 12 mm
PP
Outlet flange
for submersible centrifugal pump B6
Description: The discharge flange is used to connect individual components to the B6 submersible centrifugal pump. special connections are available on request Properties & Advantages Material: PP / Niro Nominal width: DN 65 Diameter: 160 mm
Ex-protection
Stainless steel (1.4408)
Tri-Clamp reducer
DN 50 to DN 25 / 32 / 40
Description: The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot. Material made of stainless steel (1.4408) Properties & advantages Connection of Tri-Clamp fittings DN 25 / 32 / 40 Connection to Tri-Clamp DN 50 spigots