Pump: B1 Battery
Equipment: incl. TR3 Flow Meter
Integrated pump holder with drip protection
Description:
The B1 & B2 Battery Trolley is the ideal companion when it comes to mobile chemical refuelling The safe transport ensures that even small quantities are not spilled. They are equipped with our latest battery pumps and optionally with or without Flow Meter. The Drum Pumps B1 & B2 Battery stand for long battery life, low weight and low noise. The integrated ventilation system enables continuous removal of the liquids. Large wheels facilitate handling on stairs and off-road. The Hose and the hook on the Lutz nozzle prevent the hose from slipping and is optimally protected.
- Outer dimensions in cm: 100 x 59 x 43
- Capacity up to 100 litres
- Suitable for cleaning agents and chemicals
Technical data Flow Meter TR3 can be found directly with the respective product
Features & Advantages
- max. volume flow 20 l/min
- Viscosity up to max. 400 mPas
- All-terrain pneumatic tyres (Ø 300 mm)
- Can be completely closed with a lid
- Secure mounting for Pump tube and pump during transport
- Polyethylene container with integrated handle
Suitable media: | Chromsäure, Akkusäure, Chlorsäure, Ammoniakwasser, Fotoentwickler, Fotofixierer, Glykol, Phosphorsäure, Salzsäure, Wasserstoffperoxid |
Pump tube (material): | PP (polypropylene) |
Impeller (material): | PP (polypropylene) |
Housing Material: | PE (Polyethylen) |
Static seal (material): | no seals in contact with the medium |
Drive shaft (material): | Hastelloy C (2.4610) |
Bearing (material): | ETFE / PTFE |
Flow rate (up to l/min.): | 22 |
Flow rate with nozzle (up to l/min): | 22 |
Delivery head (up to m wc): | 12 |
Density (up to kg/dm³): | 1.6 |
Viscosity (up to mPas): | 400 |
Immersion tube diameter (up to mm): | 32 |
Type of impeller: | Radial-flow impeller |
Seal type: | Sealless (SL) |
Type of drive: | Battery |
Output (W): | 260 |
Voltage (V): | 21,6 |
Capacity (Ah): | 4 |
Schlauchlänge (mm): | 1500 |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler