PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0

Drum pump for complete drum drainage - solvents

for highly flammable hydrocarbons

Profundidad de inmersión:

Motor:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0205-505
  • on request
  • is suitable for the Ex-area
Description: The drum pump is suitable for thin-bodied, flammable and inflammable liquids... mehr
Produktinformationen zu "Drum pump for complete drum drainage - solvents"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)


Description:

The drum pump is suitable for thin-bodied, flammable and inflammable liquids and hydrocarbons. Perfectly suited for removing or transferring explosive liquids and solvents.

  • Optionally available with Ex - plug
  • Pump tube is equipped with Lutz original hand wheel
  • Suitable for drum emptying of alternative fuels, oils, flammable liquids

Features & Benefits

  • Optionally with electric or compressed air drive
  • no lubricants and therefore no contamination of the pumped fluid by lubricants
  • Optimized drum emptying with a residual quantity of approx. 0,1 litres
  • No leakage if the pump tube is inclined or moved
  • Maximum product utilisation at reduced drum cleaning and waste disposal costs
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Datos técnicos
▼ MEDIUM ▼
Medios de comunicación adecuados: Styrol, Kerosin, Ameisensäure, Essigsäure, Ethanol, Benzin, Butanol, Isopropanol, Methanol, Petroleum, Aceton, Äththylacetat, Butylacetat, Nikotin, Toluol
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Estación de bombeo (material): Niro (Edelstahl)
Rodete (material): ETFE (etileno-tetrafluoroetileno copolímero)
Sello estático (material): FEP ummantelt
Cierre mecánico (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Cojinete (material): Edelkohle
Eje de transmisión (material): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 77
Cabezal de salida (hasta mWS): 14
Temperatura del fluido (máx. °C): 100
Densidad (hasta kg/dm³): 1.6
Presión de funcionamiento (bar): lower than 6 bar
Viscosidad (hasta mPas): 500
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Forma de la rueda de transporte: Rodete (rodete radial)
Tipo de sello: Cierre mecánico (GLRD)
Profundidad de inmersión (mm): from 1000 mm
Diámetro del tubo de inmersión (máx. mm): 41
Roscas de conexión: 1 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Protección contra explosiones: a prueba de explosión
Tipo de propulsión: Eléctrico
Potencia (W): 460
Voltaje (V): 230
Frecuencia (Hz): 50
grado de protección: IP54
Cumplimiento: mit Unterspannungsauslöser

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

Explosion protection
Electric
Barrel pump
Drum pump - solvent Drum pump - solvent
for highly flammable hydrocarbons
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/