PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Double diaphragm pump DMP model 1 1/2" PEE PURE

Double diaphragm pump DMP model 1 1/2" PEE PURE

for the food and pharmaceutical sector

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 5248-030
  • A 443 | B 605 | C 230
Description: The double diaphragm pump is suitable for food and pharmaceutical... mehr
Produktinformationen zu "Double diaphragm pump DMP model 1 1/2" PEE PURE"

Material: Polyethylene (PE)
Diaphragm / valve balls / seals material: PTFE / PTFE / EPDM
Center block material:  Polypropylene glass fiber reinforced (PP)

Material explanation: EPDM = ethylene propylene diene rubber, FPM = Fluorine rubber, 
NBR = acrylonitrile butadiene rubber, PP = polypropylene, PTFE = polytetrafluoroethylene, 
TPC-ET + TFM (PTFE) = Thermoplastic polyester elastomer + Modified polytetrafluoroethylene, 
TPV (EPDM-PP) = EPDM/PP compound


Description:

The double diaphragm pump is suitable for food and pharmaceutical applications, as well as large flow rates and higher viscosities.

  • typical applications: liquid food and luxury food, pharmaceutical agents and cosmetic products
  • highly resistant PE material with low coefficient of friction
  • FDA compliant

Features & Advantages

  • high hydraulic performance
  • maintenance optimized design and easy installation
  • self-priming (even in dry condition)
  • ice-free air system
  • blockage-free operation
  • food safe connections
Datos técnicos
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Double diaphragm pumps (material): non - metallic
Carcasa (material): PE (Polyethylen)
Centre block (material): Polypropylene glass fibre reinforced (PP)
Diafragmas (material): PTFE (fluoruro de polivinilideno)
Válvula de bola (material): PTFE (Polytetrafluorethylen)
Sellos (material): EPDM (etileno-propileno-dieno-monómero)
Asiento de válvula (material): PE (Polyethylen)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 370
Cabezal de salida (hasta mWS): 80
Sólidos (ø máx. mm): 7
Temperatura del fluido (máx. °C): 60
Viscosidad (hasta mPas): 30000
Suction head dry (up to max. mwc*): 4,5
Air pressure (max. bar): 8
Air pressure start-up (min. bar): 2
Sound pressure level dB(A): 80
Displacement per chamber (in cm³): 670
Displacement per chamber (in cm³): 1340
▼ PUMPE | PUMP | POMP ▼
Tamaño: 1 1/2"
Air inlet (inch) inside: 1/2"
Druckstutzen (DN): 40
Saugstutzen (DN) : 40
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Connection: Flansch
Certificación: FDA-compliant
Tipo: DMP 1 1/2" PEE Pure PE/EPDM

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/