PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0

Double diaphragm pump DMP model 1/4" mini plastic

for small plants and in the laboratory area

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 5260-070
  • A 128 | B 126 | C 74
  • is not suitable for solvents and the Ex area
Description: The double diaphragm pump is suitable for pumping small quantities, in... mehr
Produktinformationen zu "Double diaphragm pump DMP model 1/4" mini plastic"

Material: Polypropylene glass fiber reinforced (PP)
Material of diaphragm / valve balls / seals: TFM-NBR (PTFE) / PTFE / PTFE
Material of center block:
 Polypropylene carbon fiber reinforced (PP)

Material explanation: EPDM = Ethylene Propylene Diene Rubber,  FPM = Fluorine Rubber, 
NBR = Acrylonitrile Butadiene Rubber, PP = Polypropylene, PTFE = Polytetrafluoroethylene, 
TPC-ET+ TFM (PTFE) = Thermoplastic Polyester Elastomer + Modified Polytetrafluoroethylene, 
TPV (EPDM-PP) = EPDM/PP compound


Description:

The double diaphragm pump is suitable for pumping small quantities, in the laboratory field and for occasional filling

  • typical applications: Chemical circulation and feeding, liquids with solid particles such as paints and varnishes, electroplating liquids, etc.
  • integrated silencer up to model size DMP 1"
  • highly resistant TFM (PTFE) diaphragms (modified PTFE)

Features & advantages

  • high hydraulic performance
  • maintenance optimized design and easy installation
  • self-priming (even in dry condition)
  • reinforced elastomers and thermoplastic diaphragm
  • absolutely oil-free
  • blockage-free operation
Datos técnicos
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Double diaphragm pumps (material): non - metallic
Carcasa (material): PP (Polipropileno)
Centre block (material): Polypropylene carbon fibre reinforced (PP)
Diafragmas (material): TFM-NBR (PTFE)
Válvula de bola (material): PTFE (Polytetrafluorethylen)
Sellos (material): PTFE (fluoruro de polivinilideno)
Asiento de válvula (material): PP (Polipropileno)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 10,8
Cabezal de salida (hasta mWS): 80
Sólidos (ø máx. mm): 1,5
Temperatura del fluido (máx. °C): 60
Viscosidad (hasta mPas): 3500
Suction head dry (up to max. mwc*): 3
Air pressure (max. bar): 8
Air pressure start-up (min. bar): 2
Sound pressure level dB(A): 63
Displacement per chamber (in cm³): 10
Displacement per chamber (in cm³): 20
▼ PUMPE | PUMP | POMP ▼
Tamaño: 1/4" mini
Lufteinlass ( Ø mm): 4
Pressure joint (inch) inside: 1/4"
Suction joint (inch) inside: 1/4"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Protección contra explosiones: No
Connection: Gewinde
Tipo: DMP 1/4" mini PPT PP/PTFE

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

Plastic
PP
Compressed air
Double diaphragm pump DMP model 1/4" plastic Double diaphragm pump DMP model 1/4" plastic
for small plants and in the laboratory area
Plastic
PVDF
Compressed air
Double diaphragm pump DMP model 1/4" mini plastic Double diaphragm pump DMP model 1/4" mini plastic
for small plants and in the laboratory area
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/