PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Eccentric screw pump tube B70V in PURE version

Eccentric screw pump tube B70V in PURE version

for highly viscous and pasty foodstuffs

Diseño:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0175-204 + 0175-208
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D 120.1 in PURE design is a powerful positive... mehr
Produktinformationen zu "Eccentric screw pump tube B70V in PURE version"

Design: PURE with FPM seal (fluorocarbon rubber)
Drive shaft: Cardan shaft (GW)
Note: 
 The connection to the discharge connection of the pumping station is made with a Tri-Clamp connection


Description:

The Eccentric screw pump B70V-D 120.1 in PURE design is a powerful positive displacement pump for highly viscous and viscous media up to the limits of flowability. Depending on the application, various gear motors are available which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • also available in special immersion depths
  • Media examples: viscous cosmetic products, food and etc.

Features & Advantages

  • construction free of dead space
  • Uniform volume flow
  • easy to dismantle, easy to clean
  • Gentle, low-pulsation product conveying
  • Smooth running and low wear
  • Large selection of robust and powerful drive motors
  • Drive motor optionally with integrated frequency converter.
Datos técnicos
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Estación de bombeo (material): Edelstahl (1.4571)
Sello estático (material): FPM (caucho fluorado)
Cierre mecánico (material): WC, WC, FPM
Eje de transmisión (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 120
Cabezal de entrega (hasta un bar máximo)*: 6
Temperatura del fluido (máx. °C): 140
Viscosidad (hasta mPas): 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Forma de la rueda de transporte: Gelenkwelle (hochviskose Medien)
Tipo de sello: Cierre mecánico (GLRD)
Profundidad de inmersión (mm): 1100
Statorgröße: 120.1
▼ PUMPE | PUMP | POMP ▼
Druckstutzen (DN): 50
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Connection: Tri-Clamp
Certificación: FDA-compliant, Verordnung (EG) 1935/2004
Tipo: B70V Pure

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/