PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Eccentric screw pump tube B70V-D Industry

Eccentric screw pump tube B70V-D Industry

for three-phase motors

Drive shaft:

Statormaterial:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0172-121
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D 25.1 in the industrial version is a powerful... mehr
Produktinformationen zu "Eccentric screw pump tube B70V-D Industry"

Flow rate: 25 l/min .
Drive shaft: Torsion shaft (TW)
Seal type: Mechanical seal (GLRD)
Note: No Ex-approval


Description:

The Eccentric screw pump B70V-D 25.1 in the industrial version is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.

  • Cardan shaft versions also available in special immersion depths of 500 - 2000 mm
  • Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials. 

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product conveying
  • Smooth running and low wear
  • Large selection of robust and powerful drive motors
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Datos técnicos
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Estación de bombeo (material): Edelstahl (1.4571/1.4404)
Sello estático (material): FPM (caucho fluorado)
Cierre mecánico (material): Kohle, CrMO-Guss, FPM
Eje de transmisión (material): Edelstahl (1.4571)
Stator (Werkstoff): NBR hell (Nitrilbutadienkautschuk)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 25
Cabezal de entrega (hasta un bar máximo)*: 8
Temperatura del fluido (máx. °C): 80
Viscosidad (hasta mPas): 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Forma de la rueda de transporte: Torsionswelle (mittelviskose Medien)
Tipo de sello: Cierre mecánico (GLRD)
Profundidad de inmersión (mm): from 1000 mm
Diámetro del tubo de inmersión (máx. mm): 54
Statorgröße: 25.1
Roscas de conexión: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Protección contra explosiones: No
Tipo de propulsión: Corriente trifásica
Certificación:
Tipo: B70V-D

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/