PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Eccentric screw pump tube B70V-SR Industry

Eccentric screw pump tube B70V-SR Industry

with reduction gear for electric motors

Drive shaft:

Statormaterial:

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 0174-511
  • upon request
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-SR 50.1 (with reduction gear) in the industrial... mehr
Produktinformationen zu "Eccentric screw pump tube B70V-SR Industry"

Flow rate: 50 l/min .
Drive shaft: Torsion shaft (TW)
Seal type: Mechanical seal (GLRD)
Note: No Ex approval


Description:

The Eccentric screw pump B70V-SR 50.1 (with reduction gear) in the industrial version is suitable for conveying water-like to highly viscous media with and without fibrous or solid materials. Depending on the application, various compressed air and electric motors are available, which you can combine with the Pump tube at any time. This means that you are always flexible and thus save important resources.

  • PTO shaft versions also available in special immersion depths of 500 - 2000 mm
  • Pump tube equipped with Lutz original handwheel
  • Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product conveying
  • Low wear
  • Ideal for mobile use
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Datos técnicos
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Estación de bombeo (material): Edelstahl (1.4571/1.4404)
Sello estático (material): FPM (caucho fluorado)
Cierre mecánico (material): Kohle, CrMO-Guss, FPM
Eje de transmisión (material): Edelstahl (1.4571)
Stator (Werkstoff): FPM (Fluorkautschuk)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 50
Cabezal de entrega (hasta un bar máximo)*: 8
Temperatura del fluido (máx. °C): 80
Viscosidad (hasta mPas): 30000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Forma de la rueda de transporte: Torsionswelle (mittelviskose Medien)
Tipo de sello: Cierre mecánico (GLRD)
Profundidad de inmersión (mm): 1100
Diámetro del tubo de inmersión (máx. mm): 54
Statorgröße: 50.1
Roscas de conexión: 1 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Protección contra explosiones: No
Tipo de propulsión: Eléctrico, Aire comprimido
Certificación:
Tipo: B70V-SR

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

50 l/min
Mechanical seal (GLRD)
Stator NBR light
Eccentric screw pump tube B70V-SR Industry Eccentric screw pump tube B70V-SR Industry
with reduction gear for electric motors
Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/