PREIS ANFRAGEN

Mit * gekennzeichnete Felder sind Pflichtfelder.
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0

Diaphragm pump mixing system

for mixing and pumping (Ex-proof)

Preis anfragen

Mit * gekennzeichnete Felder sind Pflichtfelder.
  • 5000-140
  • on request
  • the double diaphragm pump 1/2" is mounted on a base plate on the systen
Description: For liquids that need to be mixed before processing and then pumped, or that... mehr
Produktinformationen zu "Diaphragm pump mixing system"

Note: The system is supplied already pre-assembled


Description:

For liquids that need to be mixed before processing and then pumped, or that contain small solids, the new diaphragm pump mixing system with an integrated air-operated double diaphragm pump is the perfect solution. The mixing and pumping process takes place via a suction and mixing tube and a 3-way stopcock. The pre-assembled system is ready for immediate operation in just a few steps and is also suitable for explosive liquids.

  • Mixing and pumping integrated in one system
  • Media examples: Paints and varnishes, emulsions, dispersions, suspensions, water/oil mixtures, liquids with increased viscosity and solids content

Features & Advantages

  • quick installation and time saving due to easy handling
  • compact design
  • Base plate provides good stability on the vessel lid
  • easy to insert into the 2" bunghole of the vessel by balancer or overhead crane
  • no additional mixer necessary
Datos técnicos
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Carcasa (material): acero inoxidable
Diafragmas (material): PTFE (fluoruro de polivinilideno)
Válvula de bola (material): PTFE (Polytetrafluorethylen)
Sellos (material): PTFE (fluoruro de polivinilideno), NBR (caucho de nitrilo butadieno), FPM (caucho fluorado), EPDM (etileno-propileno-dieno-monómero)
Asiento de válvula (material): Acero inoxidable
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Caudal (hasta l/min): 57
Cabeza de aspiración seca (en m): 4,3
Sólidos (ø máx. mm): 3,2
Temperatura del fluido (máx. °C): 93
Presión de funcionamiento (bar): 8,2
▼ PUMPE | PUMP | POMP ▼
Tamaño: 1/2"
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Cumplimiento: Versión atornillada
Certificación: ATEX Richtlinie (ATEX Richtlinie 2014/34/EU)
Tipo: DMP 1/2" SST SS/PTFE

* El caudal máximo es un valor determinado mediante un banco de pruebas y medido con agua a una temperatura media de aprox 20°C. La medición se realiza en la junta de presión de la bomba, sin manguera, boquilla ni caudalímetro. El caudal que se puede alcanzar en uso es menor y depende de la aplicación individual, las propiedades del medio y la configuración de la bomba. La altura máxima depende del tipo de la bomba, el motor y el liquido. Los valores de viscosidad se determinan con aceite.

** Comprobación: Liquido agua / diesel, flujo en dirección preferente, distancia de calma 0,2 m antes y después del contador

Service & Support

Sie brauchen Hilfe?

Hier finden Sie alle Möglichkeiten mit uns in Kontakt zu treten:

  +49 9342 879-0 (Zentrale)
  +49 9342 879-260 (Vertrieb)
  +49 9342 879-232 (After-Sales)

  Kontaktformular
  Angebot anfordern
  Reparatur-Service

/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/