Für die Filterung wurden keine Ergebnisse gefunden!
Ex-protection
Stainless steel
Dispositivo de sujeción para el Exzenterschneckenpumpe
ver Producto
for Eccentric screw pump B70V
Para montar la bomba de tornillo excéntrico B70V en barriles y contenedores abiertos y de paredes gruesas. Material: acero inoxidable
Brass
Válvula de derivación de latón
ver Producto
for Eccentric screw pumps B70
Cuando se utiliza la bomba de tornillo excéntrico contra los dispositivos de cierre (boquilla, válvula de bola, etc.), se recomienda el uso de una válvula de derivación.
Ø 14 mm
Aluminium
Cubo, lado del motor para B70V 12.1 a 75.1
ver Producto
for B70V 12.1 to 75.1
Si el motor es suministrado por el cliente, el cubo debe ser pedido adicionalmente de acuerdo con el diámetro del eje.
Ex-protection
1,6 - 2,5 A
Interruptor de protección del motor (Ex)
ver Producto
for Motor B70V (Ex)
Adecuado para el bombeo de líquidos inflamables y altamente inflamables (por ejemplo, etanol, gasolina) o en atmósferas potencialmente explosivas. A prueba de explosiones según EEx de IIC T6 con liberaciones térmicas y electromagnéticas, clase de protección IP 66.
Ex-protection
DN 19 (3/4")
1" IT
Tube integration
ver Producto
for mineral oil hose
Description: The hose connection ensures a good conductive transition between Hose and Pump tube. In potentially explosive atmospheres, the use of conductive Hoses is mandatory. The ohmic resistance between the fittings must be less than 10 6 Ohm. for Drum- and Container pumps Features & Benefits Brass materials for mineral oil hoses DN 19 / DN 25 according to the standard...
Ex-protection
DN 19 (3/4")
1 1/4" IT
Tube integration
ver Producto
for Drum- and Container pumps
Description: The hose bonding ensures a good conductive transition between Hose and Pump tube. In the potentially explosive area, the use of conductive Hoses is mandatory. The ohmic resistance between the fittings must be less than 10 6 Ohms. for Drum- and Container pumps Properties & Advantages Material made of brass for Hoses with nominal width DN 32 / DN 38 / DN 50
Ex-protection
DN 19 (3/4")
1 1/4" IT
Tube integration
ver Producto
for Drum- and Container pumps
Description: The hose connection ensures a good conductive transition between Hose and Pump tube. In potentially explosive atmospheres, the use of conductive Hoses is mandatory. The ohmic resistance between the fittings must be less than 10 6 Ohm. for Drum- and Container pumps Properties & Advantages Stainless steel material (1.4571) for mineral oil hoses DN 19 / DN 25 / DN 32
10 -14 kg
Equilibrador
ver Producto
for Drum Pumps with infinitely variable load...
Para Bombas de tambor de tambor con ajuste de carga infinitamente variable. Hace más fácil insertar y mover la bomba en el contenedor. Capacidad de carga: 10-14 kgTensión del cable : 2 m
Ex-protection
Brass
Tube integration
ver Producto
for Eccentric screw pumps
Description: The hose connection ensures a good conductive transition between Hose and Pump tube. In potentially explosive atmospheres, the use of conductive Hoses is mandatory. The ohmic resistance between the fittings must be less than 10 6 Ohm. for Eccentric screw pumps and Double diaphragm pumps Properties & Advantages Materials made of brass / stainless steel (1.4571)...
DN 19 (3/4")
Gasket FPM
Hose connection Tri-Clamp
ver Producto
DN 19
Description: The Tri-Clamp hose connector is required for connecting the delivery hose to the pump, nozzle, discharge elbow or Tri-Clamp fittings (consisting of hose barb, locking clip and gasket). for eccentric screw pumps, barrel pumps or double diaphragm pumps (Pure stainless steel) Features & Advantages Material: stainless steel (1.4404) for hoses with nominal diameters...
DN 38 (1 1/2")
Gasket FPM
Hose connection
ver Producto
with Tri-Clamp DN 50
Description: The hose connector with Tri-Clamp is required for connecting the delivery hose to the B70 eccentric screw pump, the discharge bend or the Tri-Clamp fittings (consisting of hose nozzle, closing clamp and seal). for eccentric screw pumps Properties & advantages Material stainless steel (1.4404) for hoses with nominal diameter DN 38 / DN 50
PP
1/2" male x 1 1/4" female
Pezón reductor (lado del producto) para DMP 1/2
ver Producto
for the Double diaphragm pump 1/2"
Description: The reducing nipple allows the connection of two different threaded sockets. special connections are available on request Properties & Advantages Materials: PP / PVC / PVDF / stainless steel (1.4571) / brass Connection 1/2" AG to 1 1/4" AG Connection 1/2" AG to 1" AG Connection 1/2" AG to 3/4" AG