No results were found for the filter!
DN 25 (1")
max 5 bar
PVC spiral hose
for aggressive and non-flammable liquids
Description: The Hose is suitable for aggressive and non-flammable liquids, but also for food liquids. It is made of PVC with embedded and galvanized steel wire helix (smooth inside and outside). Nominal diameter: DN 19 / DN 25 / DN 32 Properties & advantages Operating pressure max. 4,5 - 5 bar Fulfils the EU-regulation 10/2011 and 1935/2004.
DN 19 (3/4")
Hose set alkalis + acids
for acidic liquids and low-viscosity chemicals
Description: The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The Hose is made of PVC with embedded and galvanized steel wire helix (smooth inside and outside) . The set is used for connection to the Pump tube or the Nozzle. also available in special lengths on request Features & Advantages Nominal width DN 19 (3/4") Hose...
DN 19 (3/4")
Hose set concentrated alkalis and acids
for highly chemical liquids and salts
Description: The tubing set is for concentrated caustic + acids. The set is FDA and USP Class VI compliant. The set is used for connection to the Pump tube or the Nozzle. on request also available in special lengths Suitable for filling or transferring chemicals, food and hygiene products Features & Advantages Nominal width DN 19 (3/4") Hose connection PVDF Pre-assembled...
DN 25 (1")
Hose set mineral oils
for aggressive and non-flammable liquids
Description: The hose set is suitable for aggressive and non-flammable liquids, but also for food liquids. The Hose set is made of PVC with embedded and galvanized steel wire helix. The set is used for connection to the Pump tube or the Nozzle. also available in special lengths on request Features & Advantages Nominal width DN 25 (1") Hose connection aluminium Pre-assembled...
Ex-protection
DN 19 (3/4")
Hose set solvent (NBR)
for highly flammable hydrocarbons
Description: The hose set is suitable for a wide range of commercially available solvents. The Hose is electrically conductive so that it can also be used in explosive environments. The set is used for connection to the Pump tube or the Nozzle. also available in special lengths on request electrically conductive Features & Advantages Hose connection: 1 1/4" IG Nominal width:...
Ex-protection
DN 19 (3/4")
Hose set explosive media
for aggressive and easily flammable liquids
Description: The hose set is suitable for pure chemicals and explosive liquids. The Hose is electrically conductive so that it can also be used in explosive environments. The set is used for connection to the Pump tube or the Nozzle. also available in special lengths on request electrically conductive Features & Advantages Hose connection: 1 1/4" IG Nominal width: DN 19...
Tri-Clamp Connections
suitable for Eccentric screw pump B70V - 120.1
Description: The Tri-Clamp reducer is suitable for connection to Eccentric screw pump tube B70V - 120.1. Features & Advantages Connection: DN 50 to G 1 1/2" AG Consisting of adapter fitting Tri-Clamp incl. EPDM seal and Tri-Clamp closing clip
Pulse generator ring
for contactless indirect quantity measurement
Description: The pulse generator ring must be ordered additionally to match the shaft diameter of the motor. for Eccentric screw pumps Features & Advantages for shaft diameter: Ø 19 / Ø 20 / Ø 24 / Ø 25 / Ø 28 / Ø 30
Support bracket
with integrated pulse sensor
Description: The carrying bracket with integrated pulse sensor is the perfect upgrade for your B70V-D Eccentric screw pump. Magnetic pulses from the rotating motor shaft are transmitted to the pulse sensor without contact via a pulse encoder ring. The recorded pulses are evaluated in the Lutz BE10 operating unit and output on the display as the conveyed flow rate on the...
Ex-protection
Stainless steel (1.4408)
Tri-Clamp reducer
DN 50 to DN 25 / 32 / 40
Description: The Tri-Clamp reducer is suitable for connecting Tri-Clamp fittings to a spigot. Material made of stainless steel (1.4408) Properties & advantages Connection of Tri-Clamp fittings DN 25 / 32 / 40 Connection to Tri-Clamp DN 50 spigots
DN 9 (3/8")
Hose clamps
for hose size DN 9
Description: The hose clamp is made of stainless steel and is suitable for tying the various delivery hoses to the hose connector. Nominal sizes: DN 9 / DN 13 / DN 19 / DN 25 / DN 32 - 38 / DN 50
DN 32 (1 1/4")
max. 7 bar
PVC-Hose, fabric reinforced
for aggressive and non-flammable liquids
Description: The Hose is suitable for aggressive and non-flammable liquids. It is made of fabric-reinforced PVC. Nominal size: DN 32 / DN 38 Features & Advantages Operating pressure up to max. 6 / 7 bar