Insertion sleeve
for compressed air supply
- Order number: 0372-039
- op verzoek
Nominal width: 7.2 mm
Design: for compressed air hose DN 13
Description:
The plug-in grommet is required for connection to the coupling in order to be able to connect the maintenance unit to the compressed air hose.
- Material: Brass
Features & Advantages
- Nominal widths 7.2 and 10 mm
| Produktgruppe: | Fasspumpen / Containerpumpen, Membranpumpen |
| Accessories group: | Connections |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter