Centrifugal immersion pump B80 KME
for installation depths up to 1500 mm
- Order number: 6100-000
- upon request
Further information about the KME series such as pump types, materials etc. can be found at Inquiry
Description:
The B80 KME series was developed as a wet-installed centrifugal immersion pump for stationary use in tanks and basins. The direct-coupled pump with plain bearings is suitable for pumping and circulating neutral and chemically aggressive liquids in the chemical industry and process engineering, in electroplating and surface technology, in washing systems and water treatment plants, for sump drainage in industrial and municipal waste disposal plants or as a circulation pump in gas scrubbers and heat exchangers.
- with various plain bearing designs
- available in immersion depths from 600 - 1500 mm
Features & Advantages
- Compact dimensions
- Abrasion resistant material combinations possible
- Extremely low-vibration and low-wear operation
- All wetted parts made of corrosion resistant plastic
- Self-centering alignment in the bearing shell
| Fördermenge (bis max. m³/h)*: | 50 |
| Delivery head (up to m wc): | 40 |
| Temperature of medium (up to °C): | 90 |
| Density (up to kg/dm³): | 1.8 |
| Viscosity (up to mPas): | 75 |
| Immersion length (mm): | 1500 |
| Version: | Vertical |
| Type: | B80 KME |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter