Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)
Description:
The Pump Set is suitable for thin, flammable and highly inflammable liquids and hydrocarbons. Perfectly suited for withdrawing or transferring explosive media and solvents.
- Optionally available with Ex - plug
- Pump tube equipped with Lutz original hand wheel
- Suitable for Drum emptying alternative fuels, oils, flammable liquids
Features & Advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised Drum emptying with a remaining quantity of approx. 0.1 litres
- No leakage if the pumping station is tilted or moved
- Maximum product utilization with reduced drum cleaning and disposal rates
- Approved according to ATEX directive 2014/34/EU, category 1/2
Suitable media: | Styrol, Toluol, Nikotin, Butylacetat, Äththylacetat, Aceton, Essigsäure, Ameisensäure |
Pump tube (material): | Niro (Edelstahl) |
Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
Static seal (material): | FEP ummantelt |
Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
Bearing (material): | Edelkohle |
Drive shaft (material): | Edelstahl (1.4571) |
Flow rate (up to l/min.): | 77 |
Flow rate with nozzle (up to l/min): | 45 |
Delivery head (up to m wc): | 14 |
Temperature of medium (up to °C): | 100 |
Density (up to kg/dm³): | 1.6 |
Operating pressure (max. bar): | lower than 6 bar |
Viscosity (up to mPas): | 500 |
Type of impeller: | Radial-flow impeller |
Seal type: | Mechanical seal (MS) |
Immersion length (mm): | from 1000 mm |
Immersion tube diameter (up to mm): | 41 |
Connecting threads: | 1 1/4" |
Schlauchlänge (mm): | 2000 |
Explosion protection: | Yes |
Type of drive: | Electric |
Output (W): | 460 |
Voltage (V): | 230 |
Frequency (Hz): | 50 |
Protection type: | IP54 |
Version: | mit Unterspannungsauslöser |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter