Pump Set - Mineral oils
for oils and lubricants
- Order number: 0205-301
- upon request
- When used with diesel and similar liquids, the pump is only suitable at a fluid and ambient temperature < 40°C.
Motor: MI 4 - 500W, 230V
Immersion depth: 1000 mm (sealless)
Description:
The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils.
- Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc.
- Pump tube equipped with Lutz original hand wheel
- Suitable for filling or decanting alternative fuels
Features & Advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimized Drum emptying
- Universally resistant ETFE shaft bearing
- Maintenance without special tools
- Seal modules of the seal-less (DL) pump are interchangeable
| Suitable media: | Motoröl, Maschinenöl, Hydrauliköl, Heizöl, Diesel (<40°C) |
| Pump tube (material): | Alu (Aluminium) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | no seals in contact with the medium |
| Mechanical seal (material): | no seals in contact with the medium |
| Bearing (material): | ETFE |
| Drive shaft (material): | Edelstahl (1.4571) |
| Flow rate (up to l/min.): | 87 |
| Flow rate with nozzle (up to l/min): | 50 |
| Delivery head (up to m wc): | 19 |
| Temperature of medium (up to °C): | 100 |
| Density (up to kg/dm³): | 1.4 |
| Viscosity (up to mPas): | 500 |
| Type of impeller: | Radial-flow impeller |
| Seal type: | Sealless (SL) |
| Immersion length (mm): | from 1000 mm |
| Immersion tube diameter (up to mm): | 41 |
| Connecting threads: | 1 1/4" |
| Schlauchlänge (mm): | 2000 |
| Type of drive: | Electric |
| Output (W): | 500 |
| Voltage (V): | 230 |
| Frequency (Hz): | 50 |
| Protection type: | IP24 |
* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil. ** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter
