Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
+49 9342 879-0
Drum pump
Drum pump for complete drum drainage - solvents
Elektrische Fasspumpe Niro
Universalmotor ME
Drum pump for complete drum drainage - solvents

Drum pump for complete drum drainage - solvents

for highly flammable hydrocarbons

Immersion depth:


Preis anfragen

Fields with * are required
  • 0205-505
  • on request
  • is suitable for the Ex-area
Description: The drum pump is suitable for thin-bodied, flammable and inflammable liquids...more
Product information "Drum pump for complete drum drainage - solvents"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (mechanical seal)


The drum pump is suitable for thin-bodied, flammable and inflammable liquids and hydrocarbons. Perfectly suited for removing or transferring explosive liquids and solvents.

  • Optionally available with Ex - plug
  • Pump tube is equipped with Lutz original hand wheel
  • Suitable for drum emptying of alternative fuels, oils, flammable liquids

Features & Benefits

  • Optionally with electric or compressed air drive
  • no lubricants and therefore no contamination of the pumped fluid by lubricants
  • Optimized drum emptying with a residual quantity of approx. 0,1 litres
  • No leakage if the pump tube is inclined or moved
  • Maximum product utilisation at reduced drum cleaning and waste disposal costs
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Technical data
Suitable media: Styrol, Kerosin, Ameisensäure, Essigsäure, Ethanol, Benzin, Butanol, Isopropanol, Methanol, Petroleum, Aceton, Äththylacetat, Butylacetat, Nikotin, Toluol
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FEP ummantelt
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
Flow rate (up to l/min.): 77
Delivery head (up to m wc): 14
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.6
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 500
Type of impeller: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
Explosion protection: Yes
Type of drive: Electric
Output (W): 460
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54
Version: mit Unterspannungsauslöser

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Explosion protection
Barrel pump
Drum pump - solvent Drum pump - solvent
for highly flammable hydrocarbons
Service & Support