Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
+49 9342 879-0
Drum pump
HC Shaft
Barrel pump - acids
Elektrische Fasspumpe PP
Universalmotor MI-4

Barrel pump - acids

for acidic liquids

Immersion depth:


Preis anfragen

Fields with * are required
  • 0205-115
  • upon request
  • not suitable for flammable liquids
Description: Drum pump is suitable for corrosive, aqueous to slightly viscous...more
Product information "Barrel pump - acids"

Motor: MI 4 - 500W, 230V (for a higher flow rate and delivery head)
Immersion depth: 1000 mm (sealless)


Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for the removal or decanting of acids.

  • Examples of media: Hydrochloric acid, battery acid, ferric chloride, phosphoric acid, chromic acid and citric acid etc.
  • Pumping unit equipped with Lutz original hand wheel
  • suitable for decanting or transferring oils such as rapeseed oil and vegetable oil

Features & Advantages

  • optionally with electric or compressed air drive
  • no lubricants and therefore no contamination of the pumped medium by lubricants
  • optimized barrel emptying
  • universally resistant PTFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump can be replaced
Technical data
Suitable media: Zitronensäure, Eisen-III-Chlorid, Chromsäure, Phosphorsäure, Salzsäure
Pump tube (material): PP (polypropylene)
Impeller (material): PP (polypropylene)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
Flow rate (up to l/min.): 87
Delivery head (up to m wc): 19
Temperature of medium (up to °C): 50
Density (up to kg/dm³): 1.4
Viscosity (up to mPas): 500
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
Type of drive: Electric
Output (W): 500
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP24

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Barrel pump
Stainless steel shaft
Lutz Elektrische Fasspumpe PP mit Universalmotor MI-4 |Pumpe für Säuren, Lösungen, Galvanik Drum pump - Lyes
for low viscosity chemicals
Service & Support