Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
+49 9342 879-0
Drum pump
Lutz Pumpen | Elektrische Fasspumpe PVDF mit Universalmotor MA für hochkorrosive Chemikalien
Elektrische Fasspumpe PVDF
Universalmotor MA

Drum pump - concentrated acids and alkalis

for highly chemical liquids and salts

Immersion depth:


Preis anfragen

Fields with * are required
  • 0205-205
  • upon request
  • not suitable for flammable liquids
Description: Drum pump is suitable for corrosive, aqueous to slightly viscous...more
Product information "Drum pump - concentrated acids and alkalis"

Motor: MA II 5 - 575W, 230V (for higher flow rate, viscosity and density)
Immersion depth: 1000 mm (sealless)


Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or transferring concentrated acids and alkalis.

  • Media examples: Chloric acid, chromic acid, sulfuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc.
  • Pumping unit equipped with Lutz Original handwheel

Features & Advantages

  • optionally with electric or compressed air drive
  • no lubricants and therefore no contamination of the pumped medium by lubricants
  • optimized barrel emptying
  • universally resistant PTFE shaft bearings
  • Maintenance without special tools
  • Seal modules of the seal-less (DL) pump can be replaced
Technical data
Suitable media: Natriumhypochlorit, Chromsäure, Flusssäure, Chlorsäure, Salpetersäure, Schwefelsäure
Pump tube (material): PVDF (polyvinylidene fluoride)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
Flow rate (up to l/min.): 83
Delivery head (up to m wc): 17
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.8
Viscosity (up to mPas): 800
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
Type of drive: Electric
Output (W): 575
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Barrel pump
HC Wave
Barrel pump - acids Barrel pump - acids
for acidic liquids
Barrel pump
Stainless steel shaft
Lutz Elektrische Fasspumpe PP mit Universalmotor MI-4 |Pumpe für Säuren, Lösungen, Galvanik Drum pump - Lyes
for low viscosity chemicals
Service & Support