Pump tube Stainless steel for complete emptying - PURE
for food (PURE series)
- Order number: 0151-156 + 0151-360
- upon request
- The designation PURE includes the approvals ATEX, FDA and the regulation (EG) 1935/2004
Immersion depth: 700 mm
Type of seal: mechanical seal FPM (GLRD FPM)
Note: for the Atex - approval a pump tube with an explosion-proof motormust be used, otherwise the ATEX - guidelines cannot be observed.
Description:
The Lutz Pump tube for complete emptying (stainless steel) PURE is suitable for aqueous and fatty food. Depending on the application different Motors are available which can be combined with the Pump tube at any time. Thus you are always flexible and save important resources.The pump tubes can be disassembled and cleaned. They have no grease filling, which means that no products contamination occurs.
- also available in special immersion depths from 200 - 2500 mm
- Pump tube equipped with Lutz original hand wheel
- to Drum emptying for foodstuffs, cosmetics and pharmaceutical products containing alcohol and flammable cleaning agents
Features & Advantages
- optionally with electric or compressed air drive
- physiologically harmless version (PURE)
- hygienic / aseptic connections
- optimised drum residue emptying with a remaining quantity of approx. 0.1 litres
- maximum product utilization with reduced drum cleaning and disposal costs
- suitable for food contact according to EC 1935/2004 and FDA
- Approved according to ATEX directive 2014/34/EU, category 1/2
| Pump tube (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | PTFE (Polytetrafluorethen), FPM (fluororubber) |
| Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
| Bearing (material): | Edelkohle |
| Drive shaft (material): | Edelstahl (1.4571) |
| Flow rate (up to l/min.): | 78 |
| Delivery head (up to m wc): | 22 |
| Temperature of medium (up to °C): | 100 |
| Density (up to kg/dm³): | 1.9 |
| Viscosity (up to mPas): | 950 |
| Type of impeller: | Radial-flow impeller |
| Seal type: | Gleitringdichtung FPM (GLRD) |
| Immersion length (mm): | from 500 mm |
| Immersion tube diameter (up to mm): | 41 |
| Anschluss Tri-Clamp (DN): | 32 |
| Explosion protection: | Yes |
| Connection: | Tri-Clamp |
| Certification: | ATEX Richtlinie (ATEX Richtlinie 2014/34/EU), FDA-compliant, Verordnung (EG) 1935/2004 |
| Type: | RE Niro 41-L-GLRD |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler
