Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
+49 9342 879-0
Pump tube PP

Pump tube PP

suitable for B2 Vario and B2 Battery

Immersion depth:

Preis anfragen

Fields with * are required
  • 0102-570
  • upon request
  • not suitable for flammable media
Description: The Lutz Pump tube (PP) is suitable for low viscosity, oil based...more
Product information "Pump tube PP"

Immersion depth: 500 mm
Type of seal: sealless (DL)


The Lutz Pump tube (PP) is suitable for low viscosity, oil based lubricants, cold cleaners and softeners. With the suitable Motor it is suitable for medium to large filling quantities. Depending on the requirements, the Pump tube can be operated with the electricMotor B2 Vario or the battery version B2 Battery. 

  • Media examples: Lubricants (oil-based), cold cleaners, softeners
  • For removing small quantities from hobbocks, canisters and drums
  • Suitable for Motor B2 Vario and B2 Battery

Properties & advantages

  • No lubricants and therefore no contamination of the pumped medium
  • Optimized Drum emptying
  • Maintenance without special tools
  • Universally resistant shaft bearing made of ETFE/PTFE
  • Seal-less design (DL) conditionally safe to run dry
Technical data
Pump tube (material): PP (polypropylene)
Impeller (material): PP (polypropylene)
Static seal (material): no seals in contact with the medium
Mechanical seal (material): no seals in contact with the medium
Bearing (material): ETFE / PTFE
Drive shaft (material): Hastelloy C (2.4610)
Flow rate (up to l/min.): 65
Delivery head (up to m wc): 12
Temperature of medium (up to °C): 50
Density (up to kg/dm³): 1.6
Viscosity (up to mPas): 400
Type of impeller: Radial-flow impeller
Seal type: Sealless (SL)
Immersion length (mm): up to 500 mm
Immersion tube diameter (up to mm): 32
Connecting threads: 1"
Type: PP 32-L-DL

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Here yoll find all files for this article. more
Titel Description File name Action
01 Drum pumps Drum pumps - B2 Vario Operating Manuals 0698-130_Lutz_B2_Vario_de_en.pdf
01 Drum pumps Pump tubes - B1 & B2 Battery Operating Manuals 0698-350_Pump_tube_B1_Battery_B2_Battery_de.pdf
Pump tube PP Pump tube PP
suitable for B2 Vario and B2 Battery
Service & Support