Food

Stator EPDM

50 l/min

Eccentric screw pump tube B70V SanitaryPlus

Preview: Eccentric screw pump tube B70V SanitaryPlus

Eccentric screw pump tube B70V SanitaryPlus

for three-phase motors

Order number: 0172-548
upon request
The stator of the pumping station is made of the material EPDM (ethylene-propylene-diene-rubber)

Description: The B70V SanitaryPlus food pump is a powerful positive displacement pump for...more

Close menu

Product information "Eccentric screw pump tube B70V SanitaryPlus"

Delivery rate: 50 l/min.
Seals: EPDM (ethylene propylene diene rubber)
Note: The connection to the discharge nozzle of the pumping station is made with a Tri-Clamp connection

Description:

The B70V SanitaryPlus food pump is a powerful positive displacement pump for heavy-sensitive, viscous media with and without fiber or solids content up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packages. The pump meets the requirements of hygienic design and is certified according to the "3-A Sanitary Standards".

also available in special immersion depths
equipped as standard with a carrying handle and a Motor quick-release fastener
Media examples: liquid foodstuffs and semi-luxury foods, pharmaceutical agents and cosmetic products

Features & Benefits

easy to dismantle, easy to clean
threadless, manually releasable quick connections
Gentle, low-pulsation product delivery
construction free of dead space
Certified and approved according to the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-"

Technical data

Pump tube (material):

Edelstahl (1.4404)

Static seal (material):

EPDM

Mechanical seal (material):

SIC, Kohle, EPDM

Drive shaft (material):

Edelstahl (1.4571)

Stator (Werkstoff):

EPDM (Ethylen-Propylen-Dien-Kautschuk)

Rotor (Werkstoff):

Edelstahl (1.4571)

Flow rate (up to l/min.):

Delivery head (up to bar)*:

Temperature of medium (up to °C):

100

Viscosity (up to mPas):

100000

Seal type:

Mechanical seal (MS)

Immersion length (mm):

1100

Immersion tube diameter (up to mm):

Statorgröße:

50.1

Druckstutzen (DN):

Explosion protection:

Connection:

Tri-Clamp

Type of drive:

Three phase

Certification:

3-A Sanitary Standard

Type:

B70V-H-D SanitaryPlus

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Here yoll find all files for this article. more

Close menu