REQUEST PRICE

Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
info@lutz-pumpen.de
+49 9342 879-0
Food
EPDM gasket
Eccentric screw pump tube B70V-D in PURE version

Eccentric screw pump tube B70V-D in PURE version

for three-phase motors up to 400 Volt

Drive shaft:

Fördermenge:

Preis anfragen

Fields with * are required
  • 0172-004 + 0172-129
  • op verzoek
  • For pumping highly flammable liquids and for use in "Zone 0", use Pump tubes with Mechanical seal (GLRD), cardan shaft (GW) and PTFE stator.
Description: The Eccentric screw pump B70V-D in PURE design is a powerful positive...more
Product information "Eccentric screw pump tube B70V-D in PURE version"

Delivery rate: 12 l/min. 
Drive shaft: Torsion shaft (TW)
Note: 
  The connection to the discharge connection of the pumping station is made with a Tri-Clamp connection


Leveringssnelheid: 12 l/min. (niet Ex)

Description:

The Eccentric screw pump B70V-D in PURE design is a powerful positive displacement pump for medium, high viscosity and viscous media up to the limits of flowability. Depending on the application, you have a choice of different rotary current motors which you can combine with the Pump tube at any time. Thus you are flexible at any time and save important resources.

  • also available in special immersion depths
  • Media examples: viscous cosmetic products, food and etc.

Features & Advantages

  • Uniform volume flow
  • Easy and fast cleaning
  • Gentle, low-pulsation product conveying
  • Smooth running and low wear
  • Large selection of robust and powerful drive motors
  • Approved according to ATEX Directive 2014/34/EU, Category 1/2
Technical data
▼ WERKSTOFFE | MATERIAL | MATERIAAL ▼
Pump tube (material): Edelstahl (1.4571/1.4404)
Static seal (material): EPDM
Mechanical seal (material): WC , SiC, EPDM
Drive shaft (material): Edelstahl (1.4571)
Stator (Werkstoff): PTFE (Polytetrafluorethylen)
Rotor (Werkstoff): Edelstahl (1.4571)
▼ FÖRDERDATEN | OPERATING DATA | SPECIFICATIES ▼
Flow rate (up to l/min.): 12
Delivery head (up to bar)*: 6
Temperature of medium (up to °C): 140
Viscosity (up to mPas): 100000
▼ PUMPWERK | PUMP TUBE | POMPWERK ▼
Type of impeller: Torsionswelle (mittelviskose Medien)
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 54
Statorgröße: 12.1
▼ PUMPE | PUMP | POMP ▼
Druckstutzen (DN): 50
▼ EIGENSCHAFTEN | PROPERTIES | EIGENSCHAPPEN ▼
Explosion protection: No
Connection: Tri-Clamp
Certification: FDA-compliant, Verordnung (EG) 1935/2004
Type: B70V Pure

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Service & Support
/*VISABLE*/ /*RAPIDMAIL*/ /*OXOMI*/