Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
+49 9342 879-0
Volume preselection (relay module)
Network operation
Flow meter TS Type SL10
Flow meter TS Type SL10
Flow meter TS Type SL10
Flow meter TS Type SL10

Flow meter TS Type SL10

for acids, alkalis and aggressive media


Preis anfragen

Fields with * are required
  • 0231-011
  • upon request
  • The Flow meter with quantity preselection consists of the parts basic counter (measuring unit) and operating unit (display) and relay module (quantity preselection)
Description: The first flowmeter with touch screen display and backlighting convinces with...more
Product information "Flow meter TS Type SL10"

Version: with volume preselection (relay module)
Note: The connection to the Pump tube or system is made with a thread


The first flowmeter with touch screen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design: The rotating swash plate and a magnet enable the precise measurement of the flow rate and measure oils, aggressive media such as acids and alkalis precisely, quickly and above all efficiently. As an option, the desired quantity can be preselected with a quantity preselection ( relay module), so that the pump or the system switches off automatically after the selected quantity, thus further simplifying and securing the operation of the systems.

  • Optional with quantity preselection (relay module)
  • Media examples: Hydrochloric acid, nitric acid, etc.
  • Mobile on a Drum pump or with a nozzle connection or stationary in plant engineering

Features & Advantages

  • Measurement according to the swash plate principle
  • High measuring accuracy
  • Variable display orientation
  • Touch screen display with self-explanatory, multilingual user interface
  • Measuring range from 10 l/min- 100 l/min
  • Simple operation
Technical data
Suitable media: Salpetersäure, Salzsäure
Housing Material: PPO (Polyphenylenether)
Seals (material): FPM (fluorinated rubber)
Measuring chamber (material): PPO (Polyphenylenether), PPS (Polyphenylensulfid)
Magnet: PPS (Polyphenylensulfid) gekapselt
Flow rates (up to l/min): 100
Temperature of medium (up to °C): 60
Operating pressure (max. bar): 4
Viscosity (up to mPas): 2000
Messprinzip: Taumelscheibe
Connection: Gewinde
Inlet connection (inch): 2"
Outlet connection (inch): 1 1/4"
Messgenauigkeit kalibriert**: ± 1%
Connection: Gewinde
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP55
Version: with volume preselection
Type: SL10 / RM10 230 V

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Flow Meter TS Type VA10 Flow Meter TS Type VA10
for non-flammable liquids
Flow meter TS Type ST10 Flow meter TS Type ST10
for mineral oils and low viscosity media
Service & Support