No results were found for the filter!
Ex-protection
Stainless steel
Foot strainer
See details
for the Eccentric screw pump B70V
Description: The foot strainer can be used for the Eccentric screw pumps. By attaching the strainer to the pump base, coarse contaminants can be kept away from important components such as the drive. To be plugged onto the pump foot Features & Advantages Avoidance of impurities in the Pump tube by filtering them out Material: Stainless steel (1.4571)
Ex-protection
Stainless steel
Outlet bend
See details
for Eccentric screw pumps
Description: The discharge elbow allows liquids to be transferred or filled directly into another container. They are available in aluminium and stainless steel and are screwed onto the pump outlet. Nominal width: DN 25 Features & Advantages Enables the quick and direct transfer of liquids Union nut (1 1/2")
Suspension device
See details
for Eccentric screw pumps B70V
Description: The suspension device is used for safe storage of the B70 pumps. The pumps are thus protected and their utility value is increased at the same time. exactly adapted to the Eccentric screw pumps B70V Features & benefits Increases the value in use Protection against dropping of the Eccentric screw pump
Ex-protection
Stainless steel
Clamping device
See details
for Eccentric screw pump B70V
Description: The clamping device is for fastening the Eccentric screw pump B70V in open and thick-walled drums and containers. suitable for a wide range of pumping station diameters Features & Advantages Material made of stainless steel
Brass
Bypass valve
See details
for Eccentric screw pumps B70
Description: The bypass valve is recommended when using a closure valve. Shut-off valve for Nozzles, ball valve, etc. Features & Advantages Material brass / stainless steel Opening pressure: 2,5 bar (brass version) / 5 bar (stainless steel version) Connection type: 1 1/2"
Ø 14 mm
Aluminium
Hub, motor side
See details
for B70V 12.1 to 75.1
Description: If the motor is supplied by the customer, the hub must also be ordered in accordance with the shaft diameter. Aluminium material Features & Advantages Shaft diameter: Ø 14 mm / Ø 19 mm / Ø 24 mm / Ø 28 mm
Ex-protection
1,6 - 2,5 A
Motor protection switch
See details
for Motor B70V (Ex)
Description: The motor protection switch is equipped with thermal and electromagnetic releases and is mounted to the Motor with the matching support bracket. a suitable carrying bracket for mounting on the pump is required Features & Benefits Marking: II 2G Ex de IIC T6 Protection class: IP 66 Current ratings: 1.6 - 6.3 A
Ex-protection
Brass
Tube integration
See details
for Eccentric screw pumps
Description: The hose connection ensures a good conductive transition between Hose and Pump tube. In potentially explosive atmospheres, the use of conductive Hoses is mandatory. The ohmic resistance between the fittings must be less than 10 6 Ohm. for Eccentric screw pumps and Double diaphragm pumps Properties & Advantages Materials made of brass / stainless steel (1.4571)...
DN 19 (3/4")
Gasket FPM
Hose connection Tri-Clamp
See details
DN 19
Description: The Tri-Clamp hose connector is required for connecting the delivery hose to the pump, nozzle, discharge elbow or Tri-Clamp fittings (consisting of hose barb, locking clip and gasket). for eccentric screw pumps, barrel pumps or double diaphragm pumps (Pure stainless steel) Features & Advantages Material: stainless steel (1.4404) for hoses with nominal diameters...
DN 38 (1 1/2")
Gasket FPM
Hose connection
See details
with Tri-Clamp DN 50
Description: The hose connector with Tri-Clamp is required for connecting the delivery hose to the B70 eccentric screw pump, the discharge bend or the Tri-Clamp fittings (consisting of hose nozzle, closing clamp and seal). for eccentric screw pumps Properties & advantages Material stainless steel (1.4404) for hoses with nominal diameter DN 38 / DN 50
Stainless steel
DN 32
Rd 58 x 1/6
Adapter fitting Tri-Clamp
See details
for Tri-Clamp nozzles
Description: The adapter fitting "Tri-Clamp" is used to connect Tri-Clamp spigots to round threads according to DIN11851. for B70 SanitaryPlus and B70 PURE Properties & Advantages Material made of stainless steel Nominal sizes with DN 32 / DN 50 Round thread with 58 x 1/6 and 78 x 1/6
Ex-protection
DN 19 (3/4")
FPM
Tube integration
See details
with Tri-Clamp DN 32
Description: For connecting conductive delivery hoses to the pump, nozzle/outlet elbow or Tri-Clamp fittings in hazardous areas. The hose connection ensures a good conductive transition between the conductive Hose and the pump/fitting. The ohmic resistance between fittings must be less than 106 ohms. The hose ibbin consists of a hose barb, a clamp shell, a locking clip and a...