
Flow rate: 50 l/min .
Drive shaft: Torsion shaft (TW)
Seal type: Mechanical seal (GLRD)
Note: No Ex-approval
Description:
The B70V 25.1 Eccentric screw pump in the steel version is a powerful positive displacement pump for medium, highly viscous and viscous media up to the limits of flowability. Depending on the application, various three-phase and air motors are available, which you can combine with the Pump tube at any time. This gives you flexibility at all times and saves important resources.
- PTO shaft versions also available in special immersion depths of 500 - 2000 mm
- Media examples: viscous mineral oils, resins, emulsions, paints and many other thick materials
Features & Advantages
- Uniform volume flow
- Easy and fast cleaning
- Gentle, low-pulsation product conveying
- Low wear
- Ideal for mobile use
Estación de bombeo (material): | Stahl (verzinkt) |
Sello estático (material): | FPM (caucho fluorado) |
Cierre mecánico (material): | Kohle, CrMO-Guss, FPM |
Eje de transmisión (material): | Stahl (verzinkt) |
Stator (Werkstoff): | NBR hell (Nitrilbutadienkautschuk) |
Rotor (Werkstoff): | Stahl |
Caudal (hasta l/min): | 25 |
Cabezal de entrega (hasta un bar máximo)*: | 8 |
Temperatura del fluido (máx. °C): | 80 |
Viscosidad (hasta mPas): | 100000 |
Forma de la rueda de transporte: | Torsionswelle (mittelviskose Medien) |
Tipo de sello: | Cierre mecánico (GLRD) |
Profundidad de inmersión (mm): | from 1000 mm |
Diámetro del tubo de inmersión (máx. mm): | 54 |
Statorgröße: | 50.1 |
Roscas de conexión: | 1 1/2" |
Tipo de propulsión: | Corriente trifásica |
Tipo: | B70V-D |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler