Pump Set for residual emptying - solvent
for highly flammable hydrocarbons
- Order number: 0205-501
- upon request
- is suitable for the Ex - area
Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)
Suitable for 200l drum emptying Undervoltage release
prevents unexpected start-up of the pump after power failure.
Recommended when pumping hazardous liquids.
Description:
The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents.
- Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc.
- Pump tube equipped with Lutz original hand wheel
- Suitable for Drum emptying alternative fuels, oils, flammable liquids
Features & Advantages
- Optionally with electric or compressed air drive
- No lubricants and therefore no contamination of the pumped medium by lubricants
- Optimised Drum emptying with a remaining quantity of approx. 0.1 litres
- No leakage if the pumping station is tilted or moved
- Maximum product utilization with reduced drum cleaning and disposal rates
- Approved according to ATEX directive 2014/34/EU, category 1/2
| Suitable media: | Petroleum, Methanol, Kerosin, Isopropanol, Butanol, Ethanol |
| Pump tube (material): | Niro (Edelstahl) |
| Impeller (material): | ETFE (ethylene-tetrafluorethylene copolymer) |
| Static seal (material): | FEP ummantelt |
| Mechanical seal (material): | Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571) |
| Bearing (material): | Edelkohle |
| Drive shaft (material): | Edelstahl (1.4571) |
| Flow rate (up to l/min.): | 77 |
| Flow rate with nozzle (up to l/min): | 45 |
| Delivery head (up to m wc): | 14 |
| Temperature of medium (up to °C): | 100 |
| Density (up to kg/dm³): | 1.6 |
| Operating pressure (max. bar): | lower than 6 bar |
| Viscosity (up to mPas): | 500 |
| Type of impeller: | Radial-flow impeller |
| Seal type: | Mechanical seal (MS) |
| Immersion length (mm): | from 1000 mm |
| Immersion tube diameter (up to mm): | 41 |
| Connecting threads: | 1 1/4" |
| Schlauchlänge (mm): | 2000 |
| Explosion protection: | Yes |
| Type of drive: | Electric |
| Output (W): | 460 |
| Voltage (V): | 230 |
| Frequency (Hz): | 50 |
| Protection type: | IP54 |
| Version: | mit Unterspannungsauslöser |
* Die max. Fördermenge ist ein ermittelter Wert mittels Prüfstand und gemessen mit Wasser bei einer Mediumstemperatur von ca. 20° C. Die Messung erfolgt am Druckstutzen der Pumpe, ohne Schlauch, Zapfpistole oder Durchflussmesser. Die im Einsatz erzielbare Fördermenge ist niedriger und hängt von der individuellen Anwendung, den Medieneigenschaften sowie der Konfiguration der Pumpe ab. Die max. Förderhöhe ist ebenso abhängig von Pumpenausführung, Motor und Medium. Die Viskositätswerte werden mit Öl ermittelt. ** Prüfaufbau: Medium Wasser / Diesel, Durchfluss in Vorzugsrichtung, Beruhigungsstrecke 0,2 m vor und nach dem Durchflusszähler
