Fields with * are required
Lutz Pumpen | Deutschland
Familienbetrieb seit 1954
+49 9342 879-0
1000 mm
Explosion protection
Pump Set for residual emptying - solvent
Pump Set for residual emptying - solvent
Pump Set for residual emptying - solvent
Pump Set for residual emptying - solvent
Pump Set for residual emptying - solvent

Pump Set for residual emptying - solvent

for highly flammable hydrocarbons

Immersion depth:


Preis anfragen

Fields with * are required
  • 0205-501
  • upon request
  • is suitable for the Ex - area
Description: The Pump Set is suitable for thin-bodied, flammable and highly inflammable...more
Product information "Pump Set for residual emptying - solvent"

Motor: ME II 3 - 460W, 230V
Immersion depth: 1000 mm (sealless)

with motor ME II 3 (Ex) with undervoltage release, immersion depth: 1000 mm (with mechanical seal)
Suitable for 200l drum emptying Undervoltage release
prevents unexpected start-up of the pump after power failure

Recommended when pumping hazardous liquids.


The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents.

  • Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc.
  • Pump tube equipped with Lutz original hand wheel
  • Suitable for Drum emptying alternative fuels, oils, flammable liquids

Features & Advantages

  • Optionally with electric or compressed air drive
  • No lubricants and therefore no contamination of the pumped medium by lubricants
  • Optimised Drum emptying with a remaining quantity of approx. 0.1 litres
  • No leakage if the pumping station is tilted or moved
  • Maximum product utilization with reduced drum cleaning and disposal rates
  • Approved according to ATEX directive 2014/34/EU, category 1/2
Technical data
Suitable media: Petroleum, Methanol, Kerosin, Isopropanol, Butanol, Ethanol
Pump tube (material): Niro (Edelstahl)
Impeller (material): ETFE (ethylene-tetrafluorethylene copolymer)
Static seal (material): FEP ummantelt
Mechanical seal (material): Kohle, Keramik, PTFE, HC-4 (2.4610), Edelstahl (1.4571)
Bearing (material): Edelkohle
Drive shaft (material): Edelstahl (1.4571)
Flow rate (up to l/min.): 77
Flow rate with nozzle (up to l/min): 45
Delivery head (up to m wc): 14
Temperature of medium (up to °C): 100
Density (up to kg/dm³): 1.6
Operating pressure (max. bar): lower than 6 bar
Viscosity (up to mPas): 500
Type of impeller: Radial-flow impeller
Seal type: Mechanical seal (MS)
Immersion length (mm): from 1000 mm
Immersion tube diameter (up to mm): 41
Connecting threads: 1 1/4"
Schlauchlänge (mm): 2000
Explosion protection: Yes
Type of drive: Electric
Output (W): 460
Voltage (V): 230
Frequency (Hz): 50
Protection type: IP54
Version: mit Unterspannungsauslöser

* The maximum flow rate is a value determined by means of a test bench and measured with water at a medium temperature of approx. 20 °C. The measurement is carried out at the pressure joint of the pump, without hose, nozzle or flow meter. The achievable flow rate in use is lower and depends on the individual application, the liquid properties and the configuration of the pump. The max. delivery head also depends on the pump design, motor and fluid. The viscosity values are determined with oil.

** Test assembly: Medium water / diesel, flow in preferred direction, settling section 0.2 m upstream and downstream of flow meter

Here yoll find all files for this article. more
Titel Description File name Action
08 Motors Electric motors - Serie ME II Operating Manuals 0698-020_Motor_ME_II_de_en.pdf
01 Drum pumps Pump tubes - All models Operating Manuals 0698-030_Pump_tubes_de_en.pdf
09 Accessories Nozzles - All models Operating Manuals 0698-070_Nozzles_de_en.pdf
Complete set
Pump Set for residual draining - Explosive media Pump Set for residual draining - Explosive media
for aggressive and highly inflammable liquids
Service & Support